Skip to main content

Case 13: Remote Control with Joystick:bit

Purpose​

  • Use the joystick:bit to control the Cutebot.

Materials​

Software Platform​

MicroSoft makecode

Programming​

Step 1​

  • Click the "Advanced" to see more choices in the MakeCode drawer.

  • A codebase is required for Cutebot programming, click “Add Package” at the bottom of the drawer, search Cutebot in the dialogue box and download it.

  • A codebase is required for Joystick:bit V2 programming, click “Add Package” at the bottom of the drawer, search joystic in the dialogue box and download it.

Note: If you met a tip indicating incompatibility of the codebase, you can continue with the tips or build a new project there.

Step 2: Joystick:bit Programming​

  • Set "radio set group" to 1 in the On start brick.
  • The scope for X and Y is 0~1023, the theoretical value is 512 if the rocker is in the middle place , in this way we need to make 0~1023 map map in the scope of -100~100.
  • Set x whose value is given by "acceleration (mg) x" exactly divides 10 to the radio value in forever brick.
  • Set y whose value is given by "acceleration (mg) y" exactly divides 10 to the radio value in forever brick.
  • The scope of the acceleration value is 0~1024 , which can be regarded roughly as the speed value in 0~100 after dividing 10.

Programming​

Links: https://makecode.microbit.org/_cVWKfb09E5st

You can also download it directly below:

Step 3: Cutebot Programming​

  • Set the "radio set group" to 1 in the On start brick. Items must be the same with the remote control for the correct match.
  • Drag two "if" bricks into the on radio received brick and judge if the radio revived value name is x or y
  • If the radio received value name is x, it is the data for X and then save the value in the variable xValue.
  • If the radio received value name is y, it is the data for y and then save the value in the variable yValue.
  • In forever brick, set the left wheel speed to yValue+xValue and right wheel speed to yValue-xValue.

Programming​

Links: https://makecode.microbit.org/_WDpVxaeTXdLT

You can also download it directly below:

Result​

  • The rocker controls the movement of the Cutebot.

Exploration​

FAQ​

Relevant Files​