Case 33: Color-controlled Lights
Introduction
Recognize the color through the color recognition sensor, and control the rainbow LED to light up the in the same color.
Quick Start
Materials Required
Nezha expansion board × 1
micro:bit V2 × 1
Color sensor × 1
Rainbow LED ring × 1
Bricks × n
Tips: You may need to purchase Nezha Inventor's Kit and Purchase Interactive coding accessories pack here. if you want all the above components.
Connection Diagram
Insert the micro:bit, connect the color sensor to IIC port and the rainbow led ring to J1 on the Nezha expansion board as the picture shows.
Assembly Video
Link: https://youtu.be/I05r5ebvQXY
Assembly Steps
MakeCode Programming
Step 1
Click "Advanced" in the MakeCode to see more choices.
For programming, we need to add a package: click "Extensions" at the bottom of the MakeCode drawer and search with "nezha" in the dialogue box to download it.
Notice: If you met a tip indicating that some codebases would be deleted due to incompatibility, you may continue as the tips say or create a new project in the menu.
Step 2
Code as below:
Reference
Link: https://makecode.microbit.org/_CoKVCRc3wJJJ
You may also download it directly below:
Result
After powering on, the the lights turn on with the color detected from the color sensor.