TPbot Forkluft
Purpose
To build a TPBot Forklift.
Materials Requested
Bricks Pack
Assembly steps
Hardware Connections
Connect the 360° servo to servo 1 port on the TPBot.
Software
Program
Click "Advanced" in the makecode drawer to see more choices.
For programming the TPBot, we need to add the extensions. Click "Extensions" at the bottom of the drawer and search with tpbot in the box, then download it.
Samples program
While on start, set to show an icon and while pressing button A, make the servo connecting to S1 drive to 180 degrees; while pressing button B, set the servo connecting with S1 to ratote to 225 degrees.
Program
Reference program: https://makecode.microbit.org/_hXydb3UY06ej
You may download it directly below:
Conclusion
While pressing button A, it puts down the forklift; while pressing button B, it raises up.