Skip to main content

Case 09: The Cutebot Unicorn

The unicorn appears in large numbers in June to August, with a tendency to light, mostly day and night, often gathered in the daytime at the sap flow of green oak, or in the light wax trees also often appear to gather hundreds of unicorns, at night, in mountainous areas with street lights, can often find their traces. They mainly feed on the sap of tree wounds, or ripe fruit, and basically do not cause harm to crops and trees.

Materials Requested

TOOCA L1 Laser Engraver

Smart Cutebot Kit

3mm Plywood

Relevant parameters

ModelTOOCA L1 Laser Engraver
Material of consumablesBasswood board
Times required to be engraved/cut3

Note: This case takes a 2.8mm basswood board as an example. If you need to use different thicknesses or use different materials, please modify the drawing by yourself and refer to the Recommended parameter modify the parameters of the software.

Cutebot Unicorn.dxf

Please refer to the software operation method: Get Started Quickly

Effect Show