Skip to main content

Case 07: Tyrannosaurus Rex

The tyrannosaurus rex, or Rex Tyrannosaurus, survived in the Maastrichtian (MAA) period at the end of the Cretaceous about 68.5 to 65 million years ago at the very end of the Cretaceous and was one of the last non-avian species of the dinosaur before the Cretaceous-Tertiary extinction event. Fossils are found in the United States and Canada in North America, and it is one of the most recently extinct dinosaurs. Make a Tyrannosaurus Rex assembled model with a laser cutter.

Materials Requested

TOOCA L1 Laser Engraver

3mm Plywood

Relevant Parameters

ModelTOOCA L1 Laser Engraver
Material of consumablesBasswood board
Thickness2.8mm
Power100%
Speed240mm/min
Times required to be engraved/cut3

Note: This case takes a 2.8mm basswood board as an example. If you need to use different thicknesses or use different materials, please modify the drawing by yourself and refer to the Recommended parameter modify the parameters of the software.

Tyrannosaurus rex.dxf

Effect Show