Skip to main content

Case 05: Wipers

Purpose​

To build a wiper.

ELECFREAKS micro:bit 6 IN 1 Ring:bit Kit

Materials​

Background Knowledge​

Bricks build-up​

A detailed assembly instruction can be downloaded via the below links: Githubdownload

Software​

MicroSoftmakecode

Code​

Step 1​

Click "Advanced" in the MakeCode drawer to see more choices.

In order to programme for the Ring:bit Bricks Pack, we need to add an extension. Click "Extensions" at the bottom of the drawer. Search "servo" in the dialogue box to download it.

Note: If you met a tip indicating codebase will be deleted due to incompatibility, you may continue as the tips tell or build a new project.

Step 2​

While button A being pressed, set the servo connected to P0 port turning 180 degrees; while buttom B being pressed, set the servo connected to P0 port turning 90 degrees.

Note: As the servo we used is in 360 degrees, the "servo" extension in MakeCode is suitable for servos in 180 degrees, therefore, setting the turning angle to 0 degree or 180 degrees will lead to the servo turning clockwisely or anti-clockwisely, and 90 degrees means to stop turning.

Code​

Link: https://makecode.microbit.org/_6Pvbj1fPt33f

You can also download it directly below:

Result​

When button A being pressed, the wiper begins working; while buton B being pressed, the wiper stops working.

Exploration​

FAQ​

Relevant File​

Parallelogram mechanism: the two cranks as well as the connecting rod and frame are equal in length, their rotation speed and direction are in consistent.

Reciprocating motion: back and forth on both sides near a certain position.

The displacement of the reciprocating motion is equal to 0 because it is a positive stroke and a negative stroke. Mostly used in mechanical movements, such as pendulum, piston movement, etc.