Octopus Analog UV sensor (GUVA-S12SD)(EF04093)
Introduction
Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the same.
It can measure the total UV intensity of the sunlight; linear signal voltage output; and it can be used as UV dosimeters, UV index instrument and flame detection,etc,.
Products Link
ELECFREAKS Octopus Analog UV Sensor (GUVA-S12SD)
Characteristics
Design for the occasions need reliable and concise UV index. Support micro:bit in 3V. Easy and convenient for connection.
Parameter
Name: Octopus Analog UV sensor (GUVA-S12SD)
SKU：EF04093
Working Voltage: DC 3~5.5V
Connection Mode: G-GND，V-VCC，S-signal pin
Test Precision: ±1 UV INDEX
Wave length: 200nm-370nm
Response Time: Below 0.5 second
Size: 38.9x23.5mm
Net Weight: 5g
Quick to Start
Hardware Connection
Connect the module with the wire(with buckle) to the P1 pins on the IOT:bit, insert the micro:bit to the IOT:bit.
Software Programming
Programme in the makecode and analog read P1 to get the intensity of the UV that would be displayed on the micro:bit.
Links: https://makecode.microbit.org/_4urWJCMeuh4L
You can also download it directly:
Result
The UV intensity is showing on the micro:bit.