Case 05: Automatic Dryer

Introduction

Put your hands under the air outlet of the automatic hand dryer, it will automatically send out the wind to dehumidify and dry your hands, and then automatically stop the wind and shut down. It can meet the requirements of not using towels to dry hands and preventing cross-infection of diseases. Thus, we can use micro:bit to make an automatic dryer.

Quick Start

Materials Required

Nezha expansion board × 1

micro:bit × 1

Sonar:bit × 1

Motor × 1

RJ11 wires × 1 Tips: You may need to purchase Nezha Inventor's Kit if you want all the above compoents.

Connection Diagram

Connect the sonar:bit to J1 and the motor to M1 on the Nezha expansion board as the picture shows.

Assembly Video

Video reference: https://youtu.be/5kB0bYEsJ1c

Assembly Steps

MakeCode Programming

Step 1

Click "Advanced" in the MakeCode to see more choices.

For programming, we need to add a package: click "Extensions" at the bottom of the MakeCode drawer and search with "PlanetX" in the dialogue box to download it.

For programming, we need to add a package: click "Extensions" at the bottom of the MakeCode drawer and search with "nezha" in the dialogue box to download it.

Notice: If you met a tip indicating that some codebases would be deleted due to incompatibility, you may continue as the tips say or create a new project in the menu.

Step 2

Code as below:

Reference

Link：https://makecode.microbit.org/_LTA1RLL1ddfM

You may also download it directly below:

Result

While there is any object detected by the Sonar:bit, the fan moves automatically.