Skip to main content

Case 03: The Elk

The elk is a large herbivore with a black longitudinal stripe on the back of the neck and a brownish-white belly and rump, and after September the body fur is replaced by a longer, thicker gray winter coat.

Materials used

TOOCA L1 Laser Engraver

3mm plywood

Relevant parameters

ModelTOOCA L1 Laser Engraver
Material of consumablesBasswood board
Thickness2.8mm
Power100%
Speed240mm/min
Times required to be engraved/cut3

Note: This case takes a 2.8mm basswood board as an example. If you need to use different thicknesses or use different materials, please modify the drawing by yourself and refer to the Recommended parameter modify the parameters of the software.

Elk.dxf

Effect show